You must be 16 or over to participate in the Brickset Forum. Please read the announcements and rules before you join.

Lego Graduation Gifts

Farmer_JohnFarmer_John USA - 4,035 Miles from 62 West Wallaby St., Wigan, Lancashire, UKMember Posts: 2,327
My daughter will be graduating from college in the next couple of months and I wanted to give her something special to remind her of LEGO-filled youth and also tie in with her collegiate major. Although it wasn't a super difficult project, I've been working on this MOC periodically over the past 3+ years. I still need to get the frame completed, but at least the hard part is done. Yay!

Special thanks to @klsmith007 for the awesome job he did custom printing the periodic table of elements!


catwranglerColoradoBricksLostInTranslationGjedwardsSprinkleOtterAllBrickMynattRainstorm26Lego_Starsamiam391LegoboydavetheoxygenmanDaraghClutchPowermadforLEGOLegogramnychromastonekiki180703Bumblepantssnowhitieobi_gstluxbandit778GothamConstructionCoInfinitymankezricecakeLyichirSpeedman29bobabricksMegtheCatTheOriginalSimonBBricklover18nkx1MinifigsMeJohnyk668ImABrickManNow

Comments

  • catwranglercatwrangler Northern IrelandMember Posts: 1,325
    Oh wow, that's such an amazing and personal gift! :)
    Farmer_JohnClutchPowerkiki180703
  • Farmer_JohnFarmer_John USA - 4,035 Miles from 62 West Wallaby St., Wigan, Lancashire, UKMember Posts: 2,327
    edited March 8
    Thank you @catwrangler! It was a labor of love. Ironically LEGO is made from ABS, which is one of the many materials she studied as an undergrad. Since she is continuing on to get a Phd in the fall, I expect someday she'll hang it on her office wall for her students to see.
    catwranglerkiki180703ricecake
  • SprinkleOtterSprinkleOtter Member Posts: 2,151
    Pfft. Chemistry. Just the physics of an atom.


    Sorry. Great job- I may have to make myself a diploma someday.
  • Rainstorm26Rainstorm26 Chicago Burbs USA (and sometimes Ireland)Member Posts: 745
    edited March 8
    ^Chemical engineering....not chemistry...  written by a fellow chemical engineer

    But that display is awesome.  My son graduates from grade school this year and now I am thinking about doing something like this for him.
    Farmer_Johnkiki180703
  • ecmo47ecmo47 North CarolinaMember Posts: 1,655
    Very nice! It will cherished much more then any other gift, I'll bet. 

    You definitely will need to get it framed. Unless you glued all the pieces down, it will need glass to keep it together over time. You may need to replace all those stud-jumpers with regular tiles to keep the surface flat. 
    Farmer_Johnkiki180703stlux
  • Sds407Sds407 TennesseeMember Posts: 2
    TTU - as in TN Tech? If so, that's where I went and where my daughter is headed in the fall. 
    Farmer_John
  • Farmer_JohnFarmer_John USA - 4,035 Miles from 62 West Wallaby St., Wigan, Lancashire, UKMember Posts: 2,327
    edited March 9
    Sds407 said:
    TTU - as in TN Tech? If so, that's where I went and where my daughter is headed in the fall. 
    Yep @Sds407...that's the place. I have a Visio file of the mosaic if you want a copy to use for your daughter someday. Here's a screencap of the file image. It made it much easier for me to plan out my BL orders. The parts list on the right-hand side excludes the custom printed pieces since they were special order; not BL'd.


    bandit778AllBrickstlux
  • bandit778bandit778 Docking Bay 94. Member Posts: 1,126
    @Farmer_John
    Very nice mosaic. I actually prefer tiles to plates when doing a mosaic as I think it doesn't look quite so busy when working on a single baseplate build.
    Concerning the framing, when I had my mosaic finished, I had it fixed in place on a standard picture mounting board (so the baseplate couldn't flex) without the glass so it still had the texture of a built picture and I've had no issues with tiles falling off in the year or so it's been hanging up.
  • Farmer_JohnFarmer_John USA - 4,035 Miles from 62 West Wallaby St., Wigan, Lancashire, UKMember Posts: 2,327
    @ecmo47 and @bandit778 - I went ahead and made the changes based on your recommendations (removed the knobbed tiles around the perimeter). I also added a yellow trim line to match the school colors surrounding the "TTU."

    I'll likely go ahead and use glass with my frame just for the piece of mind of reducing the UV-exposure and to avoid losing any of the custom periodic table tiles I could never hope to replace. Here's the final result (less the frame and glass). Thanks again for your valuable input!


    catwranglerbandit778cmrt1014AllBrickricecake77ncaachampsstluxBricklover18kiki180703
  • MAGNINOMINISUMBRAMAGNINOMINISUMBRA Member Posts: 324
    ^ That's slick! Nice work Dad!
    77ncaachampsstluxFarmer_Johnkiki180703
  • Farmer_JohnFarmer_John USA - 4,035 Miles from 62 West Wallaby St., Wigan, Lancashire, UKMember Posts: 2,327
    edited March 10
    Thanks @MAGNINOMINISUMBRA! I would like to do something similar for my other kids when they finish college, but unfortunately I'm drawing a blank in the ideas department. And to complicate matters, I believe @klsmith007 is no longer making custom tiles.
  • catwranglercatwrangler Northern IrelandMember Posts: 1,325
    Maybe you can crowdsource some ideas from the denizens of the forum! What are your other kids studying? 
    Farmer_Johnkiki180703
  • Bricklover18Bricklover18 PA, USAMember Posts: 605
  • Farmer_JohnFarmer_John USA - 4,035 Miles from 62 West Wallaby St., Wigan, Lancashire, UKMember Posts: 2,327
    Maybe you can crowdsource some ideas from the denizens of the forum! What are your other kids studying? 
    Definitely a great idea!! My next child is interested in electrical engineering. I was considering a bunch of custom printed electrical elements on 2x2 tiles with labels for each. For example, resistors, inductors, capacitors, transistors, op amps, logical gates (and, or, not, xand, xor, etc.), diodes, transformers, voltage source, current source, switch, and so forth. In fact, I might be able to break them into groups, sort of like the elements are on the periodic table. The key will be finding someone to do the printing...

    I would be gladly interested in hearing other ideas though...these things are not my strongest suit. :-)
    catwrangler
  • catwranglercatwrangler Northern IrelandMember Posts: 1,325
    I wonder if it's possible to a circuit board three-dimensionally in a box frame...
Sign In or Register to comment.
Recent discussions Categories Privacy Policy